(Video) 2013 RockShox Forks and Shocks Upgrades Debuted at Sea Otter

New 2013 RockShox Shocks and Forks

(photos courtesy of bikemag.com and bikerumor.com)

With the debut of Fox's handlebar-mounted CTD (Climb, Trail, Descend) remote last year, RockShox had to step up their game. They brught out their new XLoc Full Sprint which enables riders to easily lock their front and rear suspension by the simple press of a button.
(For now the new RockShox dual hydraulic lockout is restricted to pairing with SID and Revelation XX forks, and RockShox' Monarch XX rear shock)

New for 2013, the SID and Revelation front forks were tweaked to improve their ability to smooth out the trail. Their damping mechanisms have been adjusted and improved for high and low-speed compression damping.

In addition, RockShox redesigned the rebound piston as well, incorporating their "Rapid Recovery" in both the SID and Revelation. "Rapid Recovery allows the fork to recover more quickly between consecutive bumps for better traction and control.

Next, RockShox greatly improved the Monarch's (their rear suspension system) with regard to small-bump compliance. First, they reconfigured the volume of the negative air chamber.


On top of that, Monarch RT3, XX, RL, RT and R now feature a high-volume eyelet option called HV-i: allowing for a higher volume, less progressive shocks that are lighter and less bulky. RockShox says "HV-i couples perfectly with bikes that need a little less progression, but don't need the full High Volume air can system. Lastly, RockShox is boasting new and improved seals on the shocks.

Seb Kemp of www.bikemag.com explained the last of the upgrades to the RockShox family of products — The Pike 2.0 — here. Here's a recap:

"When Fox debuted the 34 a few years back, it highlighted a gaping hole in their competitors' fork line-ups. RockShox for example, had the burly Lyrik and the much lighter Revelation, but the company needed something that cut the difference between the two and that's where the Pike fits it. The Poke features larger stanchions (as well as a stouter crown and lowers) than the Revelation, which was undergunned at the 150-millimeter travel setting when it came to particularly technical trails.

Weighing in at just a hair more than four pounds, the Pike should be popular with riders looking to add a bit of brawn to their bike's front end without also adding much in the way of weight. Since all-mountain bikes now come shod in every conceivable wheel size, the Pike is also available in 29er, 650b and 26er-compatible versions"

Check out the Pike in action in this VIDEO

Come to Bikeworks for all your 
Mountain Bike component needs.

We are located at 500 Main St. in Harleysville, Pennsylvania. You can reach us by phone at (215) 513-7550

www.guaranteedfun.com